• Equipped with the UniBloc aluminum block, to provide accurate moisture measurements.
• Equipped with a high output halogen heater capable of rapid heating.
• Wide observation window to allow checks of sample status during heating.
• 60 g capacity/0.001 g minimum display
• The temperature on the pan can be set between 50 ?C and 200 ?C.
• Can store 10 sets of measurement conditions and 100 data items.
• Cleaning and maintenance are easy.
• Liquid and paste samples can also be measured using fiberglass sheets.
• Energy saving design (32 % reduction in comparison to previous Shimadzu models)
• Fiberglass sheets for liquid measurement were used to promote liquid
evaporation.
• Two measurement conditions were used, timed ending and automatic
ending modes. Essentially the same average values were obtained.
With samples whose principal component has a relatively high
evaporation temperature and also contains moisture, the same results
will be obtained regardless of the mode used
• Approx. 5 g of corn starch was added to the pan, and was spread over
the entire surface using the tip of a spoon.
• No change in appearance was evident after drying.
• Favorable repeatability of 1 % max. was obtained.